|
Navigation:
AEMC Products>
Cable Testers >
CA7028 |
| |
|
|
| |
 |
| |
|
The Wire Mapper Pro Model CA7028 is a
hand-held structured cable mapping and troubleshooting tester designed for
use on UTP, STP, FTP and SSTP cabling equipped with RJ-45 connectors and
wired to either TIA 568A/B (ISO 11801 and EN 50137), USOC or ISDN
specifications. It detects open circuit pairs, shorts, crossed wires,
crossed pairs, reversed pairs, split pairs and shield faults.
The Model CA7028 has the ability to measure and indicate the length of the
cable under test, using a Vp (Velocity of Propagation) set by the user,
from a built-in library or manually. It will measure and report the length
of all four pairs of wires in the cable under test. It also generates an
audible tone that is transmitted into all four pairs on the cable under
test.
|
|
-
Handheld Structured Cable and Troubleshooting Tester.
-
Indicates all common wiring faults including split pairs, opens,
reversed pairs and crossed wires.
-
Unique graphical and digital display of fault information and
length.
-
Indicates distances to opens and shorts and identifies location.
-
Built-in tone generator for tracing and locating cables.
-
Built-in service check function to detect telephone,
10 Base T, 100Mbit+ and token ring.
-
Visual and audible warning of live telephone network voltages.
-
Works with Category 6 cables.
-
Rugged design weighs less than 12 oz (350g).
-
Large high-visibility blue electroluminscent backlit display.
-
Complete with remote unit and mini patch leads.
-
Active remote identifiers indicates Pass/Fail at remote end.
-
Up to 16 unique remote identifiers available.
-
Works with TIA 568A/B, USOC AND ISDN wiring schemes.
|
|
| Model CA7028 Datasheet PDF
(509kb) |
| |
|
Model TR02 (accessory)
|
Model CA7028 includes meter, soft carrying case,
remote ID (#1), 2 patch cords,
4 ea 1.5V AA batteries and user manual.
|
|
 |
| |
|
Range |
500 ft (150m) |
|
Accuracy |
± 5% |
|
Cable Types |
UTP, STP, FTP and SSTP |
|
Faults Indicated
|
Short Circuit Pair, Open Circuit Wire,
Short Between Pairs,
Split Pairs, Crossed Pairs, Pair Reversals, Shield Continuity |
|
Fault Location |
Near End, Remote End, or distance to fault |
|
Fault Display |
All fault and setting info displayed
textually and graphically |
|
Wiring Schemes |
TIA 568A/B, USOC and ISDN |
|
Service Indication |
Telephone, 10BaseT, 100Mbit+, Token Ring |
|
Voltage Warning |
Audible and visual warning of TNV (Telecom
Network Voltage) |
|
Test Inhibit |
Inhibits testing in the presence of live
voltages |
|
Tone Generator |
Oscillating 810Hz to 1110Hz |
|
Battery Indicator |
0 to 100% Bargraph |
|
Power Source |
4 x 1.5V AA Alkaline Batteries |
|
Display Backlit |
Blue
Electroluminscent |
|
Remote Display |
Green/Red Pass/Fail LED |
|
Auto-Off |
After 3 minutes |
|
Weight |
Main unit: 12 oz (350g); Remote unit: 1.5
oz (40g) |
|
| |
| |
 |
| |
|
Catalog No. |
Description |
|
2127.82 |
Model CA7028 Wire Mapper PROTM LAN
Cable Tester |
|
| |
| |
| |
 |
| |
|
2127.75 |
Model TR02 Tone Receiver/Cable Tracer |
|
2127.90 |
Wire Mapper ProTM
Remote IDs (#2-5) |
|
2127.91 |
Wire Mapper ProTM
Remote IDs (#6-9) |
|
| |
|
