|
The Clamp-On Meter Model F1N is designed to
take measurements on low and medium power electrical installations in
conductors carrying a peak current of no more than 1000A. The True RMS
current measurement range extends from 300mA to 400A. The meter measures
true TRMS current, frequency (Hz) and holds the last measurement on the
digital display while the bargraph continues to display the instantaneous.
The Model F1N has automatic or manual selection of the display range, a
40-segment analog bargraph, battery test on the bargraph during operation
of the instrument, battery level indicator and auto power off after 10
minutes of non-use.
|
 |
-
True RMS AC Current measurements to 700A.
-
Frequency measurements to 10kHz.
-
Digital display with fast analog bargraph to show surge
currents.
-
Display Current and Frequency simultaneously.
-
Auto and manual ranging modes.
-
Tapered jaws handle two 500MCM cables or 1.5" (38mm) cable.
-
Battery life indication displayed at power-up.
-
Sleep mode to conserve battery life.
-
EN 61010, 600V Cat. III
-
Includes soft protective carrying holster.
-
Electrical testing of distorted currents found on uninterruptible
power supplies (UPS), speed controls, static power blocks, chopped
power supplies, controllers and motors.
|
|
| Model F1N Datasheet PDF (295kb) |
| |
Jaw Opening 1.575" (40mm)
Conductor Size: one cable 1.65" (42mm),
two cables 1" (25.4mm),
two busbars 1.97" x 0.20" (50mm x 5mm) |
Includes soft protective
carrying holster and user manual
|
|
 |
| |
|
Current |
|
|
Measurement Range
|
0.3 to 400Arms
(700A for sine wave) |
|
|
|
|
|
|
±2% of Reading
±20cts |
|
±2% of Reading
±2cts |
|
|
Frequency |
|
Measurement Range |
0.5 to 10kHz |
|
Resolution |
0.1Hz |
|
Accuracy |
±0.2% of Reading
±3cts |
|
Power Source |
9V Alkaline battery |
|
| |
| |
| |
 |
| |
|
Catalog Number |
Description |
|
1207.01 |
Model F1N Clamp-On Meter
(AC, TRMS, 400A, Hz) |
|
| |
| |
| |
