Amprobe ACD-45PQ Power Quality Clamp Meter

The ACD-45PQ is a compact clamp meter capable of measuring power, energy and power factor on a single and three-phase systems (balanced and unbalanced). Ultra slim jaw design allows the user to clamp around conductors in confined and difficult to reach places. Add on troubleshooting capabilities with an optional PC interface kit.

Model ACD-45PQ 600 Amp Clamp-On Power Meter

Features

TRMS sensing.
Ultra slim jaws accommodate conductors up to 26mm (1.02") in diameter.
Measurements: AC/DC Voltage up to 600V, AC Current up to 600A, Resistance, Frequency Power: Active (W), Reactive (VAR) and Apparent (VA) Power with dual-display Power Factor readout, KWh Recording.
AutoVA - Auto Selection of AC Volts, DC Volts or AC Amps.
3-phase unbalanced load measurement _ calculation of the discrete single phase measurements.
Optional PC interface capacity (RS-232 KIT2).
Audible continuity.
Auto Power Off.
Automatic Polarity.
Low Battery Indication.
Peak and Data Hold feature.
Measurement Category CAT III 600V (AC/DC)
Voltage overload protection for all functions up to 600V AC/DC.
Large easy to read LCD display with backlight.
Instrument supplied with: test leads, batteries (installed), Owner's Manual and Carrying Case.

Specifications
Measurement	Range	Accuracy
AC Current	40.00A, 400.0A, 600A	(1.0% of rdg + 5 LSD) @ 50/60Hz
AC Voltage	600.0V	±(0.5% of rdg + 5 LSD) @ 50/60Hz
DC Voltage	600V	±(0.5% of rdg + 5 LSD)
Resistance	999.9 Ohms	±(1.0% of rdg + 6 LSD)
Frequency	5.00Hz to 500.0Hz	±(0.5% of rdg + 4 LSD)
Active Power (W)	0 to 360.0kW	±(2.0% of rdg + 6 LSD)
		at Harmonics Fund to 10th & PF 0.1 to 0.99
Reactive Power (VAR)	0 to 360kVAR	±(2.0% of rdg + 6 LSD)
		at Harmonics Fund to 10th & PF >0.7
Apparent Power (VA)	0 to 360kVA	±(2.0% of rdg + 6 LSD) at Harmonics Fund to 10th
Power Factor	0.10 to 0.99	±3 LSD at Harmonics fund to 21th


General Specifications
Jaw Opening	26mm max.
Display	Voltage functions: 6000 count LCD displays Power
	Resistance and Frequency functions: 9999 count LCD Display
	AC Amps clamp-on function: 4000 count LCD Display
Update Rate	Power function: 2 per second nominal Voltage, AC Amp clamp-on and
	Ohm functions: 2 per second, Nominal Frequency function 1 per second
Polarity	Automatic
Low Battery	Below 2.4V approx.
Sensing	True RMS sensing
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C, <80% R.H. (battery removed)
Temperature Coefficient	Nominal 0.15 x(specified accuracy)/°C at(0°C to 18°C or 28°C to 40°C)
Safety	Meets IEC 61010-1 2nd Ed., UL 61010-1 2nd Ed.,
	CAN/CSA C22.2 No. 61010-1.92, IEC 61010-2-032, UL 61010B-2-032
APO Timing	idle for 30 minutes
APO Consumption	4µA typical
Power Supply	Standard 1.5V 'AAA' size (NEDA 24A or IEC LR03) battery x 2
Power Consumption	11mA typical (Voltage, ACA, Hz and Power Functions)
	Ohms function: 5.5mA typical
Dimensions	266.7mm (L) x 177.8mm (W) x 81.28mm (D)
Weight	224gms approx.


Included Accessories
Instrument supplied with Test Leads, Batteries (installed), Owner's Manual and Carrying Case.

Optional Accessory
Communication Accessory	RS-232 KIT2 Data recording System

AEMC | AMPROBE | CIE | FLUKE | HT ITALIA | HODEN | PROVA | POMONA | RAYTECH | SILVERTRONIC
Home | PRODUCTS | SEARCH

Obiat Pty. Ltd.
A.C.N. 003 166 952 A.B.N. 23 003 166 952
Unit 9A/8 Avenue of the Americas, Newington NSW 2127 Australia
P.O. Box 6901 Silverwater NSW Australia 1811

AEMC | AMPROBE | CIE | FLUKE | HT ITALIA | HODEN | PROVA | POMONA | RAYTECH | SILVERTRONIC Home | PRODUCTS | SEARCH

Obiat Pty. Ltd. A.C.N. 003 166 952 A.B.N. 23 003 166 952 Unit 9A/8 Avenue of the Americas, Newington NSW 2127 Australia P.O. Box 6901 Silverwater NSW Australia 1811

AEMC | AMPROBE | CIE | FLUKE | HT ITALIA | HODEN | PROVA | POMONA | RAYTECH | SILVERTRONIC
Home | PRODUCTS | SEARCH

Obiat Pty. Ltd.
A.C.N. 003 166 952 A.B.N. 23 003 166 952
Unit 9A/8 Avenue of the Americas, Newington NSW 2127 Australia
P.O. Box 6901 Silverwater NSW Australia 1811