Where accuracy, quality, and newest technology meet. The ACDC-100 offers superior AC/DC measurement capabilities, highest product quality and enhanced ergonomics with Red, Rubber,    Ribs^TH design.
 

• AC/DC Digital Clamp-On Multimeter.
• Auto and Manual ranging.
• Relative zero mode.
• Auto power 'Off'.
• MAX capture function for in-rush current measurements (30ms response).
• Data Hold.
• Capacitance.
• Resistance.
• Diode Test.
• Audible continuity.
• Large digital display.
• Maximum conductor size 50mm (2.0").
• Rubber over-molded case with built-in probe storage.

Click PDF file to view Detailed Specs and all Ranges
Model ACDC-100 Specifications (PDF)
(documents in PDF format and will open in a new window) 
 

AC Voltage Ranges

400.0mV, 4.000V, 40.00V, 400.0V, 600V

AC Voltage Accuracy (4V to 400V range)

±(1.5% of Rdg + 4 digits) (50 to 500Hz)

AC Current Ranges

400.0A, 800A

AC Current Accuracy (0 to 600A range)

±(1.5% of Rdg + 5 digits) (40 to 100Hz)

DC Voltage Ranges

400.0mV, 4.000V, 40.00V, 400.0V, 600V

DC Voltage Accuracy (4V to 400V ranges)

±(0.5% of Rdg + 3 digits)

DC Current Ranges

400.0A, 1000A

DC Current Accuracy (0 to 800A range)

±(1.5% of Rdg + 4 digits)

Resistance Ranges

400.0Ω, 4.000Ω, 40.00Ω, 400.0kΩ, 40.00MΩ

Resistance Accuracy (4 to 400kΩ range)

±(0.6% of Rdg + 4 digits)

Capacitance Ranges

500.0nF, 5.000µF, 50.00µF, 500.0µF, 3000µF

Capacitance Accuracy

±(3.5% of Rdg + 6 digits)

Display

3-3/4 digits 4000-count LCD display

Refresh Rate

3 per second nominal

Polarity

Automatic

Low Battery

Below 2.4 volts approx.

Operating Temperature

0°C to 40°C

Relative Humidity

Max R.H. 80% for temperature up to 31°C decreasing

linearly to 50% R.H. at 40°C

Storage Temperature

-20°C to 60°C, <80% R.H. (with battery removed)

Temperature Coefficient

Nominal 0.15 x (specified accuracy)/°C at

(0°C to 18°C or 28°C to 40°C), or otherwise specified

Sensing

Average sensing

Safety

Meets EN61010-1: 2001; IEC61010-2-032 (2002),

EN61010-2-032 (2002), UL61010B-2-032 (2003),

CAT III 600 Volts AC/DC

Transient Protection

6.5kV (1.2/50µs surge)

Pollution Degree

2

EMC

Meets EN61326-1

Power Supply

Two 1.5V size 'AAA' (NEDA 24G or IEC R03) batteries

Power Consumption

Typical 11mA for AC amps/DC amps and 2.9mA all

other functions

Jaw opening/Conductor size

50mm maximum

Size

227mm (L) x 78mm (W) x 40mm (D)

Weight

290g approx.

Included Accessories

Test Leads, Batteries (installed), Users Manual, and Carrying Case