• True Rms.
• AC/DC voltage measurements up to 1000 Volts.
• Measurement Ranges: AC/DC Current, Resistance, Frequency, Capacitance, and Duty Cycle.
• Optical isolated PC interface capability.
• MAX, MIN MAX-MIN recording.
• Peak Hold.
• Auto and manual ranging.
• Auto power off.
• Data hold.
• Diode Test.
• Relative zero mode.
• DC Loop Current 4 to 20mA.
• dBm reading with 20 selectable impedance values.
• Large, easy to read LCD and Backlight display.
• High speed analog bar graph.
• Diode test
• Audible continuity.
• Audible and visual warning against improper plug-in.
• Safety CAT III, 1000V, CAT IV 600V

AC Voltage Ranges  (45 to 300Hz)

500.00mV, 5.0000/50.000V/500.00/1000.0V

AC Voltage Accuracy

±(0.8% of Rdg + 60 digits)

AC Current Ranges (50 to 60Hz

500.00/5000.0µA, 50.000/500.00mA, 5.0000/10.000A

AC Current Accuracy

±(1.0% of Rdg + 40 digits)

DC Voltage Ranges

500.00mV, 5.0000/50.000V, 500.00/1000.0V

DC Voltage Accuracy

±(0.10% of Rdg + 2 digits)

DC Current Ranges

500.00/5000.0µA, 50.000/500.00mA, 5.0000/10.000A

DC Current Accuracy

±(0.5% of Rdg + 20 digits)

Resistance Ranges

500.00Ω, 5.0000/50.000Ω/500.00k, 5.0000/50.000MΩ

Resistance Accuracy

±(0.10% of Rdg + 6 digits) for 500Ω to 500kΩ range

Frequency Ranges

5.0000Hz to 200.000kHz

Accuracy

±(0.002% of Rdg + 4 digits)

Capacitance Ranges

50.00/500.0nF, 5.000/50.00/500.0/9999µF

Accuracy

±(2.0% of Rdg + 3 digits) for 50nF to 50µF range

Duty Cycle

0.1% to 99.99% ±(3 digits/kHz + 2 digits)

Diode Range

5.0000V

Accuracy

1% + 1 digit

Test Current

0.4mA typical

Open Circuit Voltage

< 3.5V DC

Operating Temperature

0°C to 45°C

Storage Temperature

-20°C to 60°C <80% R.H. (with battery removed)

Relative Humidity

Max. R.H. 80% for temperature up to 31°C decreasing linearly

to 50% R.H. at 45°C

Pollution Degree

2

Safety Conformity

Safety

Double insulated per IEC 61010-1 2nd edition, UL 61010-1 2nd edition

and Can/CSA C22.2 No. 61010-1-0. 92 to category III 1000V AC/DC,

and category IV 600V AC/DC

Terminals/Measurement Category

Voltage: CAT III 1000V AC/DC, and CAT IV 600V AC/DC

Current (µA, mA, A): CAT III and CAT IV 600V AC and 300V DC

Overload Protection

µA and mA: 1A/600V, IR 10kA or better, Fuse

Amps: 10A/600V, IR 100kA or better, Fuse

Volts: 1050V rms, 1450V peak

Milli-Volts and Others: 600V DC and AC rms

Transient Protection

8KV (1.2/50µS Surge)

E.M.C.

Meets EN 61326-1:2006 (EN 55022), EN 61000-3-2, EN 61000-3-3,

EN 61000-4-2, EN61000-4-3, EN 61000-4-4, EN 61000-4-5,

EN 61000-4-6, EN 61000-4-8, EN 61000-4-11)

General Specifications

Display

4-4/5 digits 50,000 counts. Selectable stable mode,

5-4/5 digits 500,000 counts for DC Voltage and 6 digits 999,999 counts

for Frequency (Hz)

Polarity

Automatic

Display Refresh Rate

4-4/5 digits fast mode 5 per second nominal

5-4/5 digits stable mode 1.25 per second nominal

42 Segments Bar Graph 60 per second max.

Sensing

AC, AC+DC True RMS

Power Supply

Single Alkaline 9 volt battery NEDA 1604A, JIS 6AM6 or IEC 6LF22

Power Consumption

6mA typical

Low Battery

Below 7 volts approx.

APO Timing

Idle for 17 minutes

APO Consumption

55µA typical

Dimensions

317.6mm (L) x 177.8mm (W) x 76.2mm (D)

Weight

635g

Included Accessories

Battery (installed), test leads and user manual

Optional Accessories

USB-KIT3

PC Interface Kit (PC connection cable with Software)

www.amprobe.com

Software

CC-ACDC

Carrying Case