|
Model AT-2002 Advanced Wire Tracer |
| |
|
The AT-2000 Series, Advanced Tracing System
combines both Current Tracing and Open Tracing into one versatile
tool providing the ability to solve virtually all your tracing
problems. The Model AT-2002 contains: R-2000
Receiver, S-2600 Transmitter (9V-600V), and C2901 Cordset, Carrying
Case and User's Manual. |
|
 |
Features
- Traces live wires buried or hidden behind walls up to 13 feet
deep.
- Locates breakers, neutral and ground lines.
- Locates and traces wires in walls, floors, conduit, computer
cables etc.
- Pinpoints shorts, ground faults and broken wires.
- Performs tests without having to interrupt power.
- Does not interfere with sensitive electronic equipment.
- Shipped with: Receiver, Load Signal Generator, Power Cord
Set, Carrying Case and User's manual.
Wire Tracer Model and Equipment Guide |
|
|
General Specifications |
|
Operating Temperature |
-18°C to 49°C (0°F
to 120°F) |
|
Storage Temperature |
-40°C to 66°C
(-40°F to 150°F) |
|
Case Material |
ABS |
|
Case Size |
15.5" (W) x 11" (D) x 4" (H) |
|
| |
| |
|
Receiver Specifications
(R2000) |
|
Detectors |
Electromagnetic coil pickup for short
mode: electrostatic plate for open mode. |
|
Sensitivity Selection |
x1, x10, x100 course gain adjustment; 0
to 10 fine adjustment. |
|
Short Mode Performance |
Over 20 feet in air under test
conditions. |
|
Open Mode Performance |
Over 12 feet in air under test
conditions |
|
60Hz Rejection |
120dB |
|
Power |
9 volt battery, IEC 6LR61 |
|
Display |
10 LED's with chroma filter lens |
|
R2000 Case |
ABS 911 (flame retardant) |
|
R2000 Weight |
176 gms |
|
|
|
|
Load Signal Generator
Specifications (S2600) |
|
Operating Voltage |
9V to 600V AC or DC |
|
Operating Frequency |
32.768KHz |
|
Duty Cycle |
Transmits 2 pulses with a duration of
0.0625 each, every 0.5 seconds. |
|
Current Output |
Low Mode: 35mA peak, 4mA average
High Mode: 70mA peak, 6mA average |
|
Fuse |
Fast acting 250mA at 660V (6mm x 32mm)
(Cat # 660.25-6x32) |
|
Weight |
108gms |
|
| |
| |
|
