This shirt-pocket sized meter is only 3/8" thick and weighs less than 3 oz. With full functionality offering AC and DC Voltage to 600V, Resistance to 40 Megohm, Capacitance to 3000 μF, Frequency to 1 MHz, Continuity w/beeper, and diode test.

Features

• Measures ac and dc voltage, resistance, continuity w/ beeper, capacitance and frequency.
• Fully autoranging with 7 measurement functions and 27 ranges.
• Large oversize digital display with measurement results and the unit icon.
• Data Hold freezes measurement value.
• Average sensing.
• Power consumption (typical) 2 mA.
• Automatic Power Off , timing Idle for 30 minutes.
• APO consumption (typical) 2.2 μA.
• E.M.C. Meets EN61326.
• Battery installed, and User’s manual.
• Audible Continuity Tester Open circuit voltage 0.4 V dc typical.
• Diode Tester Test current (typical) 0.25 mA.
• Diode Tester Open circuit voltage 1.6 V dc.
• One-year warranty.

DC Voltage Ranges

400mV, 4.000V, 40.00V, 400V, 600V

DC Voltage Accuracy

±(1.0% of Rdg + 2 digits)  for 400mV range

±(2.0% of Rdg + 2 digits)  for 4V to 400V ranges

±(2.5% of Rdg + 4 digits)  for 600V range

NMRR

>50dB @ 50/60Hz

CMRR

>120dB @ DC, 50/60Hz; Rs=1kΩ

Input Impedance

10MΩ, 30pF nominal; (1000MW for 400.0mV range)

AC Voltage Ranges

4.000V, 40.00V, 400V, 600V

AC Voltage Accuracy (50/60Hz)

±(2.0% of Rdg + 5 digits)  for 4V to 400V ranges

AC Voltage Accuracy (50/500Hz)

±(3.0% of Rdg + 5 digits)  for 4V to 400V ranges

AC Voltage Accuracy (50/500Hz)

±(3.5% of Rdg + 5 digits)  for 600V range

CMRR

>60dB @ DC to 60Hz, Rs=1kΩ

Input Impedance

10MΩ, 30pF nominal

Capacitance Ranges

500nF, 5.000μF, 50.00μF, 500.0μF, 3000μF

Capacitance Accuracy

±(3.5% of Rdg + 6 digits⁴) for 500.0μF, 3000μF^1,3

Note 1. Additional 50.00nF range accuracy not specified.
Note 2. Accuracies with film capacitor or better.
Note 3. Updates >1 minute on large values.
Note 4. Specified with battery voltage above 2.8V (half full battery). Accuracy decreases gradually to 12% at low battery warning voltage of approx. 2.4V.

Resistance Ranges

400.0Ω, 4.000kΩ, 40.00kΩ, 400.0kΩ, 4.000MΩ, 40.00MΩ

Accuracy

±(1.5% of Rdg + 6 digits) for 400.0Ω range

±(1.0% of Rdg + 4 digits) for 4.000kΩ, 40.00kΩ, 400.0kΩ ranges

±(1.5% of Rdg + 4 digits) for 4.000MΩ

±(2.5% of Rdg + 4 digits) for 40.00MΩ

Open Circuit Voltage

0.4V DC typical

Frequency Ranges

400Hz, 4kHz, 40kHz, 400kHz, 1MHz

Frequency Accuracy

±(0.5% of Rdg + 4 digits) for 400Hz, 4kHz, 40kHz, 400kHz, 1MHz¹

Sensitivity (V-peak)  (5Hz to 100kHz)

>1.3Vp

(100kHz to 500kHz)

>2.2Vp

(500kHz to 1MHz)

>4.2Vp

Note 1. Specified at input voltage  <20V AC rms input signal: Sine-wave, or square-wave with duty cycle >40% and <70% Sensitivity (V-peak)

Diode Test Current

0.25mA typical

Open Circuit Voltage

1.6V DC

Continuity Tester Open Circuit Voltage

0.4V DC typical

Audible Threshold

65Ω ±55Ω

Display and Update Rate

3-3/4 digits 4000-counts; Updates 3 per second nominal

Sensing

Average sensing

Operating Temperature

0°C to 40°C

Storage Temperature

-20°C to 60°C, <80% R.H. (with battery removed)

Overload Protection

600V DC and 600V AC rms

Low Battery

Below 2.4V

Power Supply

One 3V button battery (IEC-CR2032; ANSI-NEDA-5004LC)

Power Consumption

2mA typical

Dimensions

113mm (L) x 53mm (W) x 10.2mm (D)
4.4" (L) x 2.1" (W) x 0.4" (D)

Weight

78g (3oz)