Rugged and easy to use testers for live voltage and continuity checks. Built in shaker provides the same functionality and feel as older analog solenoid testers with benefit of full input protection to CAT IV 600V, and    CAT III 1000V.
 

Features

• Auto backlit LCD Digital Display for precise voltage measurements.
• Super-bright bi-Color LED's indicate safe and dangerous voltages (above 55V DC or 30V AC).
• Auto hold feature - LED's stay illuminated for 10 seconds retaining a reading after the test is disconnected.
• Solenoid tester-like shaker to indicate AC voltage presence.
• Automatically turns ON and OFF for easy and quick measurements.
• Non-contact voltage detection and GFCI test feature for testing GFCI receptacles and breakers.
• Standard detachable test lead (black) for easy replacement with optional longer or specialized probe.
• Automatically selects AC Voltage, DC Voltage or Continuity.
• LED's indicate 10 levels of AC and DC Voltages.
• AC Voltage Ranges: 24, 48, 120, 208, 240, 277, 347, 480, 600, and 1000V.
• DC Voltage Ranges: 6, 12, 24, 36, 48, 60, 72, 110, 220, and 380V.
• Continuity buzzer and Visual continuity indication (LED).
• Water and dust proof, IP65 design.
• Supplied with: Detachable (Black) Test Lead, Screw-on Stationary (Red) Probe, Two Screw-on 4mm Probe Tips, Batteries installed, User's manual and carrying case.

LCD Display

3-digit 1000 counts. (In an RF field of 3V/m, total accuracy = Specified accuracy + 45 digits)

Update Rate

5 per second nominal

Sensing

Average sensing

Power

Two standard 1.5V type 'AAA' Alkaline batteries size (NEDA 24G, IEC R03, or NEDA 24A, or IEC LR03)

Power Consumption

3mA at Power-on ready; 30mA at 1000V AC full LED indication. 75mA at 1000V AC with shaker ON

Low Battery

Below 2.4V approx.

APO Consumption

10µA typical

APO Timing

idle for 30 seconds

Special Features

High input impedance, Indicator Self-Test, Auto-Hold, Overload-Alert Warning, EF-Detection, AC-Detection Shaker, BI-Color LED Hazardous Live Warning.

Overload Protection

1000V DC and Volts AC rms

Transient Protection

8kV lightning surge (1.2/50µS)

Measurement Category

CAT III 1000V and CAT IV 600V AC/DC

Safety

Meets EN 61010-1 and IEC 61010-1 2nd Edition:2001

Type of Protection

IP65

Pollution Degree

2

EMC

Meets EN 61326-1:2006

Altitude

Operating below 2000 meters

Operating Temperature

-10°C to 55°C

Storage Temperature

-20°C to 60°C  <80% R.H. with battery removed

Relative Humidity

Max. R.H. 80% for temperatures up to 31°C, decreasing linearly to 50% R.H. at 55°C

Temperature Coefficient

Nominal 0.15 x (specified accuracy)/°C at (-10°C to 18°C or 28°C to    55°C) or otherwise specified

Dimensions

233mm (L) x 57mm (W) x 40mm (D)

Weight

220 gms