| |
 |
| |
The Peak
Atlas DCA
A fresh approach to component analysis has resulted in the fantastic
Peak Atlas DCA, an intelligent, slim and
invaluable tool. A world of detailed component data has never been
so accessible.Just connect your component any way round
and press the test button. The Atlas DCA will then
present you with detailed component information in concise, easy to
read, scrollable pages. The displayed information will include: the
component type, special component features, component pinout, and
measured parameters (such as gain, leakage current, gate threshold
voltages, volt drops etc...). No more searching through data books
and catalogues in order to identify components and pinouts, the
Atlas does it all. |
 |
Features
- Connect any way around.
- Automatic component type identification.
- Automatic pinout identification.
- Transistor gain measurement.
- MOSFET gate threshold measurement.
- PN junction characteristics measurement.
- Leakage current measurement.
- Auto power On and power Off.
- Ultra high contrast green-mode display.
- Smart panel design.
- Supplied with Premium probes.
|
Analysis Portfolio
It doesn't matter how you connect the test clips to the component,
the Atlas can analyse a vast number of different component types
including bipolar transistors, enhancement mode MOSFETs, depletion
mode MOSFETs, Junction FETs, low power thyristors and triacs (less
than 5mA trigger and hold), diodes, multiple diode networks, LEDs,
bi-colour and tri-colour LEDs. It will even identify special
component features such as diode protection and shunt resistors in
transistors. For two-leaded components such as diodes and LEDs, any
pair of test clips can be applied to the component any way round,
the Atlas DCA sorts it all out for you.
Simplicity
There is no on/off switch, power is automatically turned on at the
start of an analysis and then automatically turned off if inactive
for more than 30 seconds. Each page of displayed information is
presented in manageable amounts, with each page being displayed when
you want it. If you want to concentrate on the "pinout" page then
just select that page, you don't have to see information that you
don't need. Specifications |
|
| Parameter |
Minimum |
Typical |
Maximum |
Notes |
| Peak test current into S/C |
-5.5mA |
|
5.5mA |
1 |
| Peak test voltage across O/C |
-5.1V |
|
5.1V |
1 |
| Measurable transistor gain range (HFE) |
4 |
|
65,000 |
2 |
| Transistor gain accuracy |
-3%-5 HFE |
|
+3%+5 HFE |
2,9 |
| Transistor VCEO |
2.0V |
|
3.0V |
2 |
| Transistor VBE accuracy |
-2%-20mV |
|
+2%+20mV |
9 |
| VBE for Darlington identification |
|
1.0V |
|
3 |
| VBE for Darlington identification (shunted) |
|
0.8V |
|
4 |
| Acceptable transistor VBE |
|
|
1.8V |
|
| Base-emitter shunt resistance threshold |
|
60k |
|
|
| Transistor collector-emitter test current |
2.45mA |
2.50mA |
2.55mA |
|
| Acceptable transistor collector leakage |
|
0.7mA |
|
6 |
| MOSFET gate threshold range |
0.1V |
|
5.0V |
5 |
| MOSFET gate threshold accuracy |
-2%-20mV |
|
+2%-20mV |
5 |
| MOSFET minimum gate resistance |
2.45mA |
2.50mA |
2.55mA |
|
| MOSFET minimum gate resistance |
|
8k |
|
|
| Thyristor/Triac gate test current |
|
4.5mA |
|
7 |
| Thyristor/Triac load test current |
|
5mA |
|
|
| Diode test current |
|
|
5mA |
|
| Diode forward voltage accuracy |
-2%-2mV |
|
+2%+2mV |
|
| VF for LED |
|
1.50V |
|
|
| Battery type |
GP23A 12V Alkaline |
| Battery voltage range |
7.50V |
12V |
|
|
| Battery voltage warning threshold |
|
8.25V |
|
|
| Inactivity power-down period |
|
30 secs |
|
|
| Dimensions (excluding test leads) |
103 x 70 x 20 mm |
| Operating temperature range |
0°C |
|
50°C |
8 |
|
Notes: |
- Between any pair of test clips.
- Collector current of 2.50mA.
- Resistance across reverse biased base-emitter > 60k.
- Resistance across reverse biased base-emitter < 60k.
- Drain-source current of 2.50mA.
- Collector-Emitter voltage of 5V.
- Thyristor quadrant 1, Triac quadrants I and III.
- Subject to acceptable LCD visibility.
- BJT with no shunt resistors
|
Included Accessories
Supplied complete with a long life battery, universal test probes
and a comprehensive illustrated user guide. |
| |
| Pricing (all prices in Australian Dollars) |
| Australia Wide |
$239.00 + GST + Freight |
| Export |
$239.00 excluding GST + Freight |
| Freight Charges |
|
| Australia |
$12.00 + GST |
| Export |
$20.00 |
|
|
