| |
 |
| |
|
Atlas LCR - Passive Component Analyser
The World’s First
The Atlas LCR is an advanced instrument that greatly simplifies the
testing of passive components. Traditional LCR bridges are
inherently complex and very time consuming to use. The Atlas LCR
does everything automatically, it tells you the component type in
addition to component value data. What’s more, the Atlas LCR
automatically selects the best signal level and frequency for the
particular component under test.
It doesn’t get any easier than this
Just clip the universal test leads to your component and press the
test button. In seconds, the Atlas LCR will identify the type of
component (Inductor, Capacitor or Resistor) together with the
component’s main value. Additionally, further component data is also
displayed, such as the DC resistance of an inductor. The test
frequency is automatically selected to suit the component under test
and this is also confirmed on the scrollable display. |
 |
Features
- Automatic component identification.
- Automatic test frequency selection (DC, 1kHz, 15kHz, 200kHz).
- Delayed or instant analysis (for hands free operation).
- Auto power-off.
- Non-volatile probe and test lead compensation.
- Interchangeable probe sets.
- Automatic ranging and scaling with real units display.
- 1% basic accuracy.
|
|
Specifications |
|
| Parameters |
Minimum |
Typical |
Maximum |
Notes |
| Inductance |
range |
1µH |
|
10H |
|
| resolution |
0.4µH |
0.8µH |
|
|
| accuracy |
±1% ±1.6µH |
1,2,4 |
| Capacitance |
range |
0.4pF |
|
10,000µF |
|
| resolution |
0.1pF |
0.3pF |
|
|
| accuracy |
±1% ±0.3pF |
1,2,5 |
| Resistance |
range |
1Ω |
|
2MΩ |
|
| resolution |
0.3R |
0.6Ω |
|
|
| accuracy |
±1% ±0.6Ω |
1,2,6 |
| Peak test voltage |
-1.05V |
|
+1.05V |
|
| Peak test current |
-3.25mA |
|
+3.25mA |
|
Test
Frequency
Accuracy |
1kHz |
-100ppm |
|
+100ppm |
|
| 14.925kHz |
-100ppm |
|
+100ppm |
|
| 200kHz |
-100ppm |
|
+100ppm |
|
| Sine Purity |
-60dB 3rd harmonic |
|
| Operating temperature range |
10°C |
|
40°C |
3 |
| Battery operating Voltage |
8.5V |
|
13V |
|
|
| |
| Notes: |
1.
|
Within 12 months of factory calibration. Please contact us
if you require a full-calibration and certificate of traceable
calibration. |
| 2. |
Specified at temperatures between 15°C
and 30°C. |
| 3. |
Subject to acceptable LCD visibility. |
| 4. |
For inductance between 100µH
and 100mH. |
| 5. |
For capacitance between 200pF and 500nF. |
| 6. |
For resistance between 10 ohms and 1 megohm |
|
| |
| |
|
Included Accessories
Supplied with detachable micro-hooks, allowing the use of the
optional SMD Tweezers, clutch grabbers and gold plated crocodile probes. |
| |
| Pricing (all prices in Australian Dollars) |
| Australia Wide |
$329.00 + GST + Freight |
| Export |
$329.00 excluding GST + Freight |
| Freight Charges |
|
| Australia |
$12.00 + GST |
| Export |
$20.00 |
|
|
