|
Model 1AC-II
VoltAlertTM Voltage Detector |
|
Overview
VoltAlert™ ac voltage tester from
Fluke is easy to use-just touch the tip to a terminal strip,
outlet, or cord. When the tip glows red, you know there's
voltage in the line. Electricians, maintenance, service,
safety personnel, and homeowners can quickly test for
energized circuits and defective grounds on the factory
floor, in the shop, or at home.
|
|
 |
Features
- Detects control voltage from 90VAC
to 1000VAC.
- Fits in a shirt pocket for convenience.
- All outer surfaces are non-conductive for
safety.
- Detects voltage without metallic contact.
- Manufactured, printed and packaged in the
US.
- Quickly locates the hot, neutral and ground
terminals in any receptacle.
|
|
| |
|
Technical
Specifications |
|
Operating Principle
|
Senses the steady state
electrostatic field produced by ac voltage through
insulation without requiring contact to the bar
conductor. A red glow at the tip and a beeping noise
(if not switched OFF) indicates the presence of
voltage. |
|
Voltage Sensing
Ranges |
Nominally, 90V AC to
1000V AC or 200V AC to 1000V AC depending on model,
45Hz to 405Hz, also a 20V to 90V circuit model. |
|
Detector Tip Style |
Blade or round,
depending on model. |
|
Light Source |
One high intensity red
LED. |
|
Agency Approvals |
c CSA us, CE, TUV,
C-Tick. |
|
Safety Rating |
1000V, CAT IV. |
|
IP Rating |
IP40 |
|
Operating Temperature |
-10°C
to 50°C |
|
Operating Humidity
Range |
0% to 90% (0°C
to 30°C)
0% to 75% (30°C to 40°C)
0% to 45% (40°C to 55°C) |
|
Operating Altitude |
3000 meters |
|
Batteries |
Two 'AAA' Alkaline
batteries included. |
|
| |
|
Note:
Product does not respond to random electrostatic discharge. |
| |
|
Ordering
Information |
|
Model 1AC-II |
Fluke VoltAlert™
Voltage detector. (90Vac to 1000Vac) |
|
|
