Model 233A Remote Display
Automotive Digital Multimeter -Overview |
| |
|
Overview
The new Fluke 233/A Remote Display Automotive Digital
Multimeter Kit allows you to be in two places at once. The removable
display solves the problems of holding both the meter and the test
leads to make a measurement. The Fluke 233/A works on either
conventional or hybrid vehicles
|
|
|
|
Features
- True-Rms AC voltage and current for accurate measurements on
non-linear signals.
- Measure up to 1000V AC and DC.
- Measure up to 10A (20 amp for 30 seconds).
- Capacitance range to 10000µF.
- Frequency to 50kHz.
- Built-in thermometer conveniently
allows you to take temperature readings without having to carry
a separate instrument.
- Resistance, Continuity and Diode test.
- Low power wireless technology allows
the display to be carried up to 10 meters (30 feet) away from
the point of measurement.
|
- The removable magnetic display can be
conveniently mounted where it is easily seen.
- Make measurements without holding the
meter. Improve visual focus on probe placement and electrical
measurements.
- Use as a conventional multimeter when the display is
connected.
- Radio transmitter automatically turns off when the display
is connected to the meter body.
- Auto power off maximizes battery life.
- Battery life 400 hours approximately.
- Easy to read display with large digits and bright backlight.
What would you do if
you could be in two places at once?
By simply sliding the wireless display
out of the Fluke 233/A's meter body, the technician can place the
display where it is most easily seen - up to 10 meters from the
point of measurement - while putting the meter in the best position
to take measurements. The removable display has a magnetic back and
flat bottom so it can be mounted or placed on any flat surface to be
conveniently seen.
|
|
|
|
The detachable wireless display lets
Automotive Technicians:
- Find a comfortable position to view and record test data,
even when the test location is hard to reach or is in a dirty or
noisy environment.
- Attached test leads to brake lights while sitting in the
driver seat, pressing the brake pedal and viewing the display.
- Safely view under-hood measurements on a moving vehicle.
- Separate the tasks of positioning the meter and reading test
results, devoting full attention to each job - and working more
safely.
- Run tests and read results at a safe distance from
high-voltage, high-current systems. The Fluke 233 is safety
rated for use in CAT III 1000V, CAT IV 600V working
environments, important for technicians working on hybrid
vehicles.
|
|
Ordering
Information |
|
Fluke 233/A |
Remote Display Automotive Multimeter
Kit |
|
