Model 375 AC/DC
True RMS Clamp Meter |
| |
|
Overview
With True-Rms AC voltage and current
measurements, the Fluke 375 Clamp Meter can be ready up to 600 volts and
600 amps in both AC and DC modes, and is capable of frequency
measurements up to 500Hz. Additionally, the model 375 is compatible with
the iFlex™ flexible current probe (optional), which when used with the
current meter expands the current measurement to 2500 amps.
|
|
|
Features
-
iFlex™ flexible
current probe attachment (option) expands the measurement range
to 2500 Amps AC while providing increased display flexibility,
ability to measure awkward sized conductors and improved wire
access.
-
CAT III 1000V, CAT IV 600V.
-
True-Rms AC voltage and current for accurate
measurements on non-linear signals.
-
Integrated low pass filter and state of the art
signal processing allows for use in noisy electrical
environments while providing stable readings.
-
Proprietary inrush measurement technology to
filter out noise and capture motor starting current exactly as
the circuit protection sees it.
-
Ergonomic design fits in your hand and can be
used while wearing personal protective equipment.
-
Large, easy to read backlight display.
-
Automatically sets the correct measurement range
so you do not need to change the switch positions while taking a
measurement.
- 3-year warranty.
|
|
|
| Specifications |
|
DC Voltage |
|
0 to 600.0V |
Accuracy 1% of reading + 5 digits |
|
|
DC mV |
500mV |
|
AC Voltage (True-Rms) |
|
0 to 600.0V |
Accuracy 1.5% of reading + 5 digits |
|
|
AC Current (True-Rms) |
|
0 to 600.0A |
Accuracy 2% of reading + 5 digits |
|
0 to 2500A |
Using optional iFlex™ Flexible
Current Probe |
|
|
iFlex Capability |
|
|
Resistance |
|
60KΩ |
Accuracy 1% of reading + 5 digits |
|
|
Capacitance |
|
1 to 1000µF |
Accuracy 1% of reading + 4 digits |
|
|
Continuity |
≤ 30Ω |
|
Inrush |
100ms |
|
Temperature Coefficient |
0.01%/°C (,18° or >28°) |
|
Min/Max/Avg |
Yes |
|
Data Hold |
Yes |
|
Backlight |
Yes |
|
| |
|
|
| Environmental |
|
Operating Temperature |
-10°C to
+50°C |
|
Storage Temperature |
-40ºC to
+60ºC |
|
Operating Altitude |
3,000
meters |
|
Operating Humidity |
< 90% at 10°C to 30°C, < 75% at 30°C to 40°C |
|
| |
| |
| Safety |
|
Safety Rating |
EN/IEC
1010-1-2001, 600V CAT III, CAT IV 300V |
|
| |
| |
| Mechanical Specifications |
|
Diameter of Measureable Conductor |
34mm maximum (750 MCM) |
|
Dimensions |
248mm (H) x 85mm (W) x 45mm (D) |
|
Weight |
375g |
|
Warranty |
Three
years for electronics, 1-year for cable clamp assembly |
|
Power |
Two type 'AA' 1.5V Alkaline, IEC1010-2-031 |
|
| |
|
|
| Ordering Information |
|
Model Name |
Product
Description |
|
Fluke Model 375 |
True-rms Clamp Meter. Including: Two 'AA'
Alkaline Batteries, Coated Instruction Card, TL75 Test Leads, Safety
Information Sheet,
and Soft Carrying Case. |
|
Fluke i2500-10 (optional probe) |
iFlex™ Flexible
Current Probe |
|
| |
