Model 715
Volt/mA
Loop Calibrator |
| |
|
The Fluke 715 Volt/ mA Calibrator delivers outstanding performance,
durability and reliability. Offered in the rugged Fluke 80 Series
DMM package, the calibrator is compact, lightweight, and easy to
carry. With a push button interface similar to the multifunction
Fluke 740 Series Documenting Process Calibrators, the 715 is easy to
use. It is EMI tolerant, dust and splash resistant, and features a
removable battery door for quick battery changes.
|
|
 |
Features
- Measure loop current (0-20 mA, 4-20 mA) signals with 0.015% accuracy
and 1 µA resolution.
- Measure voltage output process signals from PLCs, transmitters.
- Source or simulate 24 mA loop current.
- Source voltage to 100 mV or 10V.
- 24V loop supply with simultaneous current measurement.
|
|
|
|
Specifications |
|
Voltage
Measurement
|
Range: |
0 to 100mV 0 to 10V |
|
Resolution: |
10µV to 1mV |
|
Accuracy: |
0.02% of reading + 2 LSD |
|
Current Measurement |
Range: |
0 to 24mA dc |
|
Resolution: |
0.001mA dc |
|
Accuracy: |
0.015% + 2 LSD |
|
Current Sourcing |
Range: |
0 to 20mA or 4 to 20mA¹ |
|
Accuracy: |
0.015% of reading + 2 LSD |
|
Drive Capability: |
1000Ω @ 24mA |
|
Loop Power while measuring mA: |
24v |
|
Voltage Sourcing: |
0 to 100mV or 0 to 10V |
|
Display Current and % of Span: |
mA or % |
|
Auto Step, Auto Ramp: |
No |
|
Span Check: |
No |
|
|
Note¹ will over-range to 24mA |
|
| |
|
General Specifications |
|
Operating temperature: |
-10ºC to
55ºC |
|
Non-operating temperature: |
-40ºC to
60ºC |
|
Relative humidity (% RH operating without condensation): |
95% (10ºC
to 30ºC); 75% (30ºC to 40ºC);
45% (40ºC to 50ºC); 35% (50ºC to 55ºC) |
|
Operating altitude: |
3,000m max |
|
Vibration: |
Random,
2g, 5-500 Hz |
|
Shock: |
1m drop
test |
|
Safety: |
CSA C22.2
No. 1010.1:1992 |
|
Power: |
Single 9V
battery ANSI/NEDA 1604A,
or IEC 6LR619V alkaline |
|
Battery Life |
18 hours typical, at 12mA |
|
Size
(with holster): |
201 mm L x
98mm W x 52 mm D
(7.93 in X 3.86 in x 2.06 in) |
|
Weight
(with holster): |
Approx.
600g (21 oz) |
|
Size
(without holster): |
187 mm L x
87mm W x 32 mm D
(7.35 in X 3.41 in x 1.25 in) |
|
Weight
(without holster): |
Approx.
330g (12 oz) |
|
Display: |
Clear, 5
digit liquid crystal |
|
Warranty: |
3 years |
|
| |
|
|
| Ordering Information |
| Model |
Description |
Model 715
|
Volt/mA Calibrator, including accessories
|
|
| Note¹ Flex-Stand™ allows meter to hang, lean or
stand for convenience and best viewing. |
|
|
