Model 787 Processing DMM
with Loop Calibrator - Overview |
| |
Overview
Fluke combined the DMM you trust with the loop calibrator you need.
Double Your Power.
A maintenance and calibration tool that will be at home
in every instrumentation technician's tool box, the Fluke 787
ProcessMeter™ combines a DMM and a Loop Calibrator in one rugged, handheld
tool, for about what you would expect to pay for a loop calibrator alone.
Based on the trusted Fluke 87 DMM, the 787 adds the ability to measure,
source, and simulate dc loop current with 0.05% accuracy and 1 microamp
resolution. |
 |
Features
- DMM and loop calibrator in one tool
- Clear LCD with backlight; 4,000 counts
(30,000 counts for dc current)
- Externally accessible battery for easy
battery changes.
- 1000V overload protection on V, ohms,
frequency.
- 150V overload protection on mA, backed
up by 440 mA 1000V fuse.
- 25% Manual Step plus Auto Step and Auto
Ramp on mA output.
|
|
|
The Fluke 787
ProcessMeter™
puts a complete troubleshooting solution in the palm of your hand. Get in
touch with more information, faster and easier with the newest member of
the Fluke 80 Series, the 787 ProcessMeter. The 787 gives you the
measurement capabilities you expect from our rugged, reliable DMM's plus
the ability to source, simulate, or measure dc current with 1 microamp
resolution and accuracy of 0.05%. Put it all together and you have the
ideal tool for troubleshooting and calibrating current loop applications.
So if you're tired of always tracking down a calibrator, lugging around
two tools and switching back and forth, get the single best solution for
doubling your power. |
|
|
Here's the power the 787 ProcessMeter™
puts into
your hands.
 |
|
|
| |
Precision 1000V, 440 mA digital
multimeter.
|
| |
Features
- Measure ac and dc volts, ac
and dc current, resistance, continuity, and frequency.
- 0.1% dc voltage accuracy.
- 0.05% dc current accuracy, 1
‘A resolution to 30 mA.
- Simultaneous mA and % of
scale readout.
- True rms ac voltage
measurement to 1 kHz.
- Frequency measurement to 20
kHz.
- Min/Max/Average/Touch-Hold/Relative
modes.
- Diode test and continuity
beeper.
- Clear LCD with backlight; 4,000
counts (30,000 counts for dc current).
- Externally accessible battery for
easy battery changes.
- 1000V overload protection on V,
ohms, frequency.
- 150V overload protection on mA,
backed-up by 440 mA 1000V fuse.
|
| DC Current
Source/Loop Calibrator |
| |
- 20 mA current
source/simulator.
- Simultaneous mA and % of
scale readout.
- Manual step (25%, coarse,
fine) plus auto step and auto ramp.
|
 |
Safety
meets 1000 volt IEC 1010 Cat III standards |
|
|
