 |
for use with DMM's,
Oscilloscopes, ScopeMeters
and Power Quality Analyzers |
|
Large AC Current Probe
The Fluke i1000s is a clamp-on AC current probe designed to
expand oscilloscope applications in industrial and power
environments. The Current Probe is ideal for measuring distorted
current waveforms and harmonics.
-
Allows accurate
measurement of currents from 100mA to 1000 Amps rms, 5hZ to
100kHz without breaking into the circuit.
-
A passive filter
eliminates noise and ring on rapidly rising di/dt waveform,
ensuring accurate screen displays.
-
Connects directly to an
oscilloscope through a reinforced coaxial cable and an insulated
BNC connector.
-
Output levels 1mV/A, 10mV/A and 100mV/A.
-
Can be used with
multimeters with optional PM9081/001 BNC/Banana adapter.
-
One year warranty.
|
|
 |
| |
Nominal Current Range
|
10 Amps
100 Amps
1000 Amps |
Continuous Current
Range
|
0.1 Amp to 10 Amps
0.1 Amp to 100 Amps
1 Amp to 1000 Amps |
| Maximum Non-Destructive
Current |
2000 Amps |
| Lowest Measurable
Current |
0.1 Amp |
Basic Accuracy
|
1% +1 amp (48Hz to 65
Hz)
(% of reading + floor-spec) |
| Useable Frequency |
5 Hz to 100 kHz |
Output Level(s)
|
100mV/Amp
10mV/Amp
1mV/Amp |
|
| |
| |
 |
| |
| Safety |
CAT IV, 300 Volts, CAT III, 600 Volts |
| Maximum Voltage |
600 Volts AC |
|
| |
| |
 |
| |
| Warranty |
One year |
| Maximum Conductor Diameter |
54mm |
| Output Cable Length |
1.6 meters |
| BNC Adapter |
Yes |
|
| |
| |
 |
| |
|
Model |
Description |
| Model i1000s |
1000Amp AC Current Clamp |
|
