 |
| |
|
High safety AC current clamp for
DMM's Fluke
Current clamps are the ideal tools to extend the functionality of
Fluke Tools. The i400 is a single range 400Amp AC current clamp
with current output via safety shrouded banana plugs. The clamp is
compatible with most Fluke multimeters or any other current
measurement device that accepts 4mm-shrouded banana plugs and has
an AC milliamp range. The division ratio is 1000:1.
-
Companion to your DMM
to measure up to 400 Amps AC.
-
1mA/Amp output
guarantees easy reading on your meter.
-
Only current clamp
available with a CAT IV 600V, CAT III 1000V rating.
-
Specially designed to
offer maximum utility in a very compact shape.
-
Take accurate current
readings without breaking the circuit.
-
Soft non-slippery
overmold handle prevents from accidental touching live wiring.
-
Maximum conductor
diameter 32mm.
|
|
 |
| |
| Nominal Current Range |
400 Amps |
| Continuous Current
Range |
1 Amp to 400 Amps |
| Maximum Non-Destructive
Current |
1000 Amps |
| Lowest Measurable
Current |
1 Amp |
| Basic Accuracy |
2% +0.06 amp (45Hz to 400
Hz)
(% of reading + floor-spec) |
| Useable Frequency |
5 Hz to 20 kHz |
| Output Level(s) |
1mA/amp |
|
| |
| |
 |
| |
| Safety |
CAT IV, 600 Volt, CAT III,
1000 Volt |
| Maximum Voltage |
1000 volts AC rms from
earth to ground, in compliance with EN61010 |
|
| |
| |
 |
| |
| Warranty |
One year |
| Maximum Conductor
Diameter |
32mm (1.25") |
| Maximum Conductor Size
(busbar) |
750 MCM |
| Output Cable Length |
1.5 meters |
| Shrouded banana Plugs |
Yes |
|
| |
| |
 |
| |
|
Model |
Description |
| Model i400 |
400Amp AC Current Clamp |
|
