Obiat Pty Ltd distributors of Electronic and Professional Scientific Test Equipment.

 

Sydney Australia

. . . . keeping your world up and running
Navigation: Fluke Accessory Index > AC and AC/DC Current Clamp Index > Model i430-Flex-4Pak
   

   
 

The i430 Flex current probe utilizing the Rogowski principal. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas, without batteries or an external power source.

This 4-pack is perfect for use with 3-phase tools such as the Fluke 430 series of power quality analyzers as the Flex clamp fits around bus bars and large or hard-to-reach conductors.

 
 
 
Current Range 3000 Amps A.C. RMS
Voltage Output 85mV (@ 1000 Amps RMS, 50 Hz)
Accuracy ±1% of reading (@ 25C, 50Hz)
Linearity ±0.2% of reading (10% to 100% of range)
Noise ±1mV AC RMS (10Hz to 7kHz)
Output Impedance 82 ohms minimum
Load Impedance 50 K-Ohms
Internal Resistance per 100mm Probe Length 10.5 Ohms ±5%
Bandwidth 10Hz to 7kHz (-3db)
Phase Error ±1% (45Hz to 65Hz)
Position Sensitivity ±2% of reading maximum
Temperature Coefficient 0.08% maximum of reading per °C
Working Voltage 1000V AC RMS or DC (head) 30 volts maximum (output)
 
 
 
Probe and Cable Material
 		 TPE rubber, reinforced insulation UL94 V-0, Colour Red Munsell 7.5 R1/14.
Coupling Material Polypropylene, UL94 V-0
Probe Cable Length 610mm
Probe Cable Diameter 12.4mm
Probe Cable Bend Radius 40mm
Output Cable Length 2.5 meters RG58
Output Connector Safety BNC Connector
Operating Temperature -20°C to +90°C
Storage Temperature -40°C to +105°C
Operating Humidity 15% to 85% (non condensing)
Degree of Probe Protection IP41
 
 
 
Safety










 		 BS EN 61010-1 2001
BS EN 61010-2-032 2002
BS EN 61010-031 2002, 1000V rms, Category III Pollution
Degree 2
Use of the probe on uninsulated conductors is limited to
1000 V AV rms or DC and Frequencies below 1kHz.
Please note that this probe is designed to work with the Fluke model 435, if used with other products
Safety rating for the output to earth is limited to 600 V AC rms or DC.

 

AEMC | AMPROBE | CIE | FLUKE | HT ITALIA | HODEN | PROVA | POMONA | RAYTECH |  SILVERTRONIC
Home | PRODUCTS | SEARCH
Obiat Pty. Ltd.
A.C.N. 003 166 952      A.B.N. 23 003 166 952
Unit 9A/8 Avenue of the Americas, Newington NSW 2127 Australia
P.O. Box 6901 Silverwater  NSW Australia 1811

Phone: 61-2-9748- 8699

Fax: 61-2-9748-8544

E-mail:
 

 information@obiat.com.au
sales@obiat.com.au

Copyright ©                                             Last Update: Wednesday, 13 April 2011