 |
| |
|
The essential verification tester.
Whether you're an electrical contractor, a home networking
professional, datacom specialist or IT/network manager, Fluke
Networks family of powerful Voice/Data/Video (VDV) verification and
troubleshooting tools will allow you to verify your work while
delivering a quality installation.
The flagship product of the verification line is the MicroScanner
Pro. This powerful tool is designed to prevent and solve cable and
wire installation problems allowing you to confirm continuity,
wiring configuration and the location of cable faults, saving you
time and money at every installation.
|
|
 |
- Flashes hub port light.
- Identifies10/100 Ethernet with new
Network Identification feature.
- Measures cable length and distance to
faults via Time Domain. Reflectometry (TDR) technology.
- Test twisted pair and coax cable
- Matches (UTP or coaxial) cables to
offices during adds, moves and changes.
|
|
|
 |
| |
| Dimensions |
139.7mm x 82.5mm x 25.4mm |
| Battery |
9-volt alkaline battery; low
battery indication. |
| Display |
Custom LCD, 1.75" x .85"
|
Applications
|
Shielded (STP) and UTP cable;
75 or 50 Ohm Coaxial cable; 10 Base-T or 10/100 Base-T networks.
|
Main Tester Interface
|
Modular 9 connector for
length, 10/100 link identification, wire map, office identifier,
toner; loopback interface: module 8 connector used for patch cable
wiremap. |
Length Measurement
|
Measures length on all 4 pairs
and displays in feet or meters; max length 1500 ft (457 m).
|
Length Calibration
|
User selectable NVP, NVP
calculation based on known cable length (min. length 50 ft (15 m)
and max. length 1500 ft
(457 m). |
| Wiremap and
Office/Identifier |
Faults detected: Opens,
Shorts, Reversed pairs, Swapped pairs, and Split pairs, distance
maximum length: 656 ft (200/m). |
Office Identifier
|
6 passive test plugs attached
to far end (identified as #1-3 and #5-7); distance maximum length
656 ft (200 mm). |
| Toner Frequency |
User may select 1 of 4
predefined tone sequences. |
Toner Interface
|
Main Mod8 port for tone
generation on all 4 pairs. Ground jack provided for grounding
MicroScanner Pro during trace operations. |
High Voltage Input
Protection
|
The test interface withstands
input hazard conditions that arise from normal telephone interfaces
(48 VDC at less than 80 mA) or 24 VAC power used to power many
telephone key sets. |
| Wiremap Adapter |
Dimensions: 2.25" x .5 x .625" |
| Coax Adapters |
Dimensions: 3" x .63" x .58" |
|
| |
| |
| |
 |
| |
| Model |
Description |
Model MT-8200-32A
|
MicroScanner Pro, Cable Verification Tester
Includes:
MicroScanner Pro, Wiremap Adapter (Office ID 4), Coax Adapter (CATV type,
F-connector), 9-volt alkaline battery and user guide. |
Model MT-8200-24A
|
MicroScanner Pro VDV Kit. The Complete
VDV Cable Verification Tool Kit. Includes: MicroScanner Pro,
IntelliTone Probe, Wiremap Adapter (Office ID 4), Coax Adapter (CATV type,
F-connector), bare wire adapter, Office/Room ID kit (1-3 and 5-6), 9-volt
alkaline battery, Quick Reference Guide and User CD. |
|
| |
 Model MT-8200-24A
MicroScanner Pro VDV Kit. The Complete VDV Cable Verification Tool
Kit. |
|
| |
 |
| |
 |
Model MT-8202-04
MicroScanner Pro Carrying Case |
 |
Model MT-8203-14
Wiremap Adapter |
 |
Model MT-8203-15
Coax Adapter |
 |
Model MT-8203-16
Bare Wire Adapter |
 |
Model MT-8203-17
Office/Room ID Kit |
|
|
