 |
Features
- Analyzer for Single-Phase and Balanced Three-Phase Systems.
- Harmonic Analysis of Voltage and Current (1 to 50th order).
- True-RMS measurement of Volts with 0.5% of reading basic accuracy.
- True-RMS measurement of Amps with 2% of reading basic accuracy.
- Graphic Waveform of Voltage and Current.
- Transient Detection and Logging of Swell, Dip, and Outage.
- Active Power (W, KW, MW, GW).
- Apparent (VA, KVA, MVA).
- Reactive Power (VAR, KVAR, MVAR).
- Measure Power Factor and Phase Angle.
- Energy (WH, KWH, KVARH, PFH).
- Programmable VT ratio from 1 to 3000.
- Display of Overlapped Voltage and Current Waveform.
- Maximum Demand (MD in W, KW, MW) with Programmable Period.
- Harmonic Analysis (V and I) to the 50th Order.
- Data Hold functions.
- Auto power Off function in 15 minutes (selectable).
- Optional isolated USB data connection.
- Unlimited data logging facility using a PC.
- Analyzer supplied with: User's Manual, Software User's Manual,
Software CD, Test Leads, Alligator Clips, RS232 to USB Bridge, two 1.5
volt Batteries and Carrying Bag.
|
- Display of 25 Harmonics in One Screen.
- Data-logging of 32, 64, 128, or 256 points/cycles.
- Analysis of Total Harmonic Distortion (%THD-F).
- Graphic Phasor Diagram.
- Capture 128 Transient Events (Time + Cycles + Faults) with
Programmable Threshold (%), also can be reviewed in LCD display.
- 50,000 Records with Programmable Interval (1 to 6,000 seconds).
- Real-time Output of Waveform, Power Parameters and Harmonics at
Command.
- Large LCD Display with Backlight.
- Optical Isolated RS-232C Interface.
- Power saver for Long-term Monitoring.
- Built-in Calendar/Clock for Data Logging.
|
|
|
|
